Bachelor of Engineering Science

Note

This course is only offered to international students. Domestic students are advised to refer to the Bachelor of Engineering (Honours) Diploma in Professional Engineering Practice (C09067), which includes industry experience and provides a comprehensive preparation for a career in the engineering profession.

This course is an engineering technologist-level program which is similar in nature to the Bachelor of Engineering (Honours) (C09066) but does not provide full professional engineering status.

This course provides students with the skills required at an engineering technologist level – and hence the ability to work with professional engineers – without developing full professional engineering competencies.

Innovation and Transdisciplinary program

Transdisciplinary Electives at UTS Employers tell us the skills our graduates acquire from undertaking a Transdisciplinary Elective sets them apart from the crowd. That’s why we have embedded this program into every undergraduate degree. All you need to do is choose the Elective that inspires you the most. Transdisciplinary Electives integrate knowledge from multiple disciplines, allowing you to approach complex problems from a range of perspectives. By combining methods and insights from various disciplines, transdisciplinary learning often leads to breakthrough ideas and creative innovations that may not be possible within the confines of a single discipline. If you find yourself rapt by the world of innovation – you can pair your core degree with a Diploma in Innovation, graduating with two qualifications in the same timeframe. In both instances, you’ll work on a real-world challenge presented by an industry partner organisation – partners who often create career pathways for our graduates. * Excludes students concurrently enrolled in the Bachelor of Creative Intelligence and Innovation.

Study plan

The programs below show a suggested sequence of subjects for each major for a full-time student commencing the course in Autumn session. They are intended as a guide only and do not take into account such factors as recognition of prior learning, changes in attendance mode and subject availability, or satisfactory academic progress. Students should consult the Timetable Planner to confirm the availability of subjects in the current academic year.

Please make a selection:

Autumn or Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Civil Engineering	maj03134	84
Data Science Engineering	maj03515	84
Electrical Engineering	maj03413	84
Electronic Engineering	maj03527	84
Mechanical Engineering	maj03139	84
Mechatronic Engineering	maj03507	84
Software Engineering	maj03520	84
Flexible Engineering	maj03542	84
Chemical Process Engineering	maj03546	84
Renewable Energy Engineering	maj03547	84

First year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Introduction to Engineering Projects	48230	6
Mathematics 1	33130	6
Physical Modelling	68037	6
Introduction to Civil and Environmental Engineering	48310	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 2	33230	6
Chemistry and Materials Science	60101	6
Engineering Mechanics	48321	6
Surveying	48320	6

Second year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Engineering Computations	48221	6
Engineering Project Appraisal	41200	6
Mechanics of Solids	48331	6
Fluid Mechanics	48641	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Designing Sustainable Engineering Projects	41201	6
Construction	48340	6
Environmental and Sanitation Engineering	48350	6
Select 6 credit points of options:		6

Third year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Soil Behaviour	48330	6
Structural Analysis	48349	6
Construction Materials	48352	6
Select 6 credit points of options:		6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Project BEngSc	48001	6
Concrete Design	48353	6
Select 6 credit points of options:		6
Select 6 credit points from the following:		6
Geotechnical Engineering	48360	6
Hydraulics and Hydrology	48362	6
Introduction to Building Information Modelling	42095	6
Road and Transport Engineering	48370	6

First year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 1	33130	6
Introduction to Engineering Projects	48230	6
Programming 1	41039	6
Introduction to Data Engineering	41082	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 2	33230	6
Introduction to Data Analytics	31250	6
Network Fundamentals	41092	6
Fundamentals Studio A	41084	6

Second year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Physical Modelling	68037	6
Data Systems	41091	6
Database Fundamentals	31271	6
Fundamentals Studio B	41085	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Engineering Project Appraisal	41200	6
Applications Studio A	41086	6
Machine Learning	31005	6
Select 6 credit points from the following:		6
Data Science Engineering choice	cbk92153	6

Third year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Designing Sustainable Engineering Projects	41201	6
Cloud Computing and Software as a Service	41001	6
Applications Studio B	41087	6
Select 6 credit points of options:		6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Project BEngSc	48001	6
Cybersecurity	48730	6
Select 12 credit points of options:		12

First year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 1	33130	6
Fundamentals of C Programming	48430	6
Introduction to Electrical and Electronic Engineering	48510	6
Physical Modelling	68037	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 2	33230	6
Introduction to Engineering Projects	48230	6
Foundations of Electrical and Electronic Technology	48521	6
Electronics and Circuits	48520	6

Second year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Engineering Project Appraisal	41200	6
Introductory Digital Systems	48441	6
Introductory Embedded Systems	48434	6
Signals and Systems	48540	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Designing Sustainable Engineering Projects	41201	6
Electromechanical Automation	48531	6
Circuit Analysis and Design	48530	6
Control Design	41277	6

Third year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Power Electronics	41278	6
Electrical Power Systems	48572	6
Select 6 credit points from the following:		6
Electrical Engineering options	cbk92203	12
Select 6 credit points from the following:		6
Electives	cbk90228	18

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Project BEngSc	48001	6
Select 6 credit points from the following:		6
Electrical Engineering options	cbk92203	12
Select 12 credit points from the following:		12
Electives	cbk90228	18

First year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 1	33130	6
Physical Modelling	68037	6
Fundamentals of C Programming	48430	6
Introduction to Electrical and Electronic Engineering	48510	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 2	33230	6
Introduction to Engineering Projects	48230	6
Electronics and Circuits	48520	6
Foundations of Electrical and Electronic Technology	48521	6

Second year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Engineering Project Appraisal	41200	6
Introductory Digital Systems	48441	6
Introductory Embedded Systems	48434	6
Signals and Systems	48540	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Designing Sustainable Engineering Projects	41201	6
Advanced Mathematics and Physics	68038	6
Integrated Electronic Systems Design	41033	6
Circuit Analysis and Design	48530	6

Third year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Microelectronics	41276	6
Control Design	41277	6
Electronic Components and Fabrication	41034	6
Select 6 credit points from the following:		6
Electives	cbk90228	18

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Project BEngSc	48001	6
Select 6 credit points from the following:		6
Electronic Engineering option	cbk92204	6
Select 12 credit points from the following:		12
Electives	cbk90228	18

First year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 1	33130	6
Introduction to Engineering Projects	48230	6
Introduction to Mechanical Engineering	48610	6
Physical Modelling	68037	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Materials and Manufacturing Engineering A	41053	6
Applied Mechanics and Design A	41054	6
Introduction to Mechatronics Engineering	41099	6

Second year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 2	33230	6
Machines and Mechanisms A	41056	6
Thermofluids A	41057	6
Mechanical Design Fundamentals Studio 1	41059	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Engineering Project Appraisal	41200	6
Dynamic Systems and Control A	41058	6
Applied Mechanics and Design B	43014	6
Mechanical Design Fundamentals Studio 2	41060	6

Third year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Designing Sustainable Engineering Projects	41201	6
Thermofluids B	43015	6
Select 6 credit points of options:		6
Mechanical Systems Design Studio 1	41066	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Project BEngSc	48001	6
Select 12 credit points of electives:		12
Machines and Mechanisms B	43017	6

First year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 1	33130	6
Introduction to Engineering Projects	48230	6
Physical Modelling	68037	6
Introduction to Mechanical Engineering	48610	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Materials and Manufacturing Engineering A	41053	6
Applied Mechanics and Design A	41054	6
Introduction to Mechatronics Engineering	41099	6
Programming 1	41039	6

Second year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 2	33230	6
Embedded Mechatronics Systems	48622	6
Machines and Mechanisms A	41056	6
Mechanical Design Fundamentals Studio 1	41059	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Engineering Project Appraisal	41200	6
Dynamic Systems and Control A	41058	6
Programming for Mechatronic Systems	41012	6
Embedded Mechatronics Studio	41070	6

Third year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Designing Sustainable Engineering Projects	41201	6
Industrial Robotics	41013	6
Robotics Studio 1	41068	6
Select 6 credit points of options:		6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Project BEngSc	48001	6
Sensors and Control for Mechatronic Systems	41014	6
Select 12 credit points of options:		12

First year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 1	33130	6
Introduction to Engineering Projects	48230	6
Programming 1	41039	6
Business Requirements Modelling	31269	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 2	33230	6
Programming 2	48024	6
Systems Testing and Quality Management	31282	6
Database Fundamentals	31271	6

Second year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Physical Modelling	68037	6
Information System Development Methodologies	31257	6
Data Structures and Algorithms	31251	6
Select 6 credit points from the following:		6
Technical subject choice (Software Engineering)	cbk91234	24

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Engineering Project Appraisal	41200	6
Software Architecture	48433	6
Software Design Studio	41127	6
Select 6 credit points from the following:		6
Technical subject choice (Software Engineering)	cbk91234	24

Third year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Designing Sustainable Engineering Projects	41201	6
Software Development Studio	41113	6
Select 6 credit points from the following:		6
Technical subject choice (Software Engineering)	cbk91234	24
Project BEngSc	48001	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Select 6 credit points from the following:		6
Technical subject choice (Software Engineering)	cbk91234	24
Select 18 credit points of options:		18

First year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 1	33130	6
Introduction to Engineering Projects	48230	6
Physical Modelling	68037	6
Introduction to Electrical and Electronic Engineering	48510	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 2	33230	6
Electronics and Circuits	48520	6
Chemistry and Materials Science	60101	6
Sustainable Energy Studio	41125	6

Second year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Engineering Project Appraisal	41200	6
Electrical Power Systems	48572	6
Programming 1	41039	6
Energy Storage Technologies	43123	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Designing Sustainable Engineering Projects	41201	6
Electromechanical Automation	48531	6
Physics of Energy	68412	6

December session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Environmental Planning and Law	48850	6

Third year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Project BEngSc	48001	6
Renewable Energy Systems Studio A	48561	6
Energy Economics, Optimisation and Policy	43026	6
Select 6 credit points from the following:		6
Electives	cbk90228	18

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Renewable Energy Technology	43124	6
Renewable Energy Systems Studio B	48550	6
Select 12 credit points from the following:		12
Electives	cbk90228	18

First year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 1	33130	6
Introduction to Engineering Projects	48230	6
Physical Modelling	68037	6
Chemistry and Materials Science	60101	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Mathematics 2	33230	6
Cell Biology and Genetics	91161	6
Introduction to Chemical Process Engineering	41117	6
Chemistry 2	65212	6

Second year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Engineering Project Appraisal	41200	6
Fluid Mechanics	48641	6
Unit Operations	41382	6
Process Simulation	41383	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Environmental and Sanitation Engineering	48350	6
Process Dynamics and Control	41385	6
Advanced Fluid and Particle Mechanics	41381	6
Select 6 credit points of options:		6

Third year

Autumn session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Designing Sustainable Engineering Projects	41201	6
Thermofluids B	43015	6
Chemical Thermodynamics and Reactor Design	41384	6
Heat and Mass Transfer	41380	6

Spring session	Subject Code	Credit PointsA credit point is the unit of measure of workload for individual subjects.
Project BEngSc	48001	6
Process Design and Safety Studio	41386	6
Select 12 credit points of options:		12

Course fees

For relevant fee information, please choose from the following:

Local student

All students at UTS pay tuition fees to contribute towards the cost of their studies.

In 2024 all offers made to domestic undergraduate students will be for Commonwealth Supported Places (CSP), which means that the Australian government makes a substantial contribution towards the cost of your education, and you pay the balance through student contributions.

The amount you pay depends on your area of study and the number of credit points (cp) in which you enrol. At UTS 48 credit points is considered to be one Equivalent Full Time Study Load (EFTSL).

The table to the right shows the amount a student can expect to pay for one year of full-time study (1.0 EFTSL).

Students can choose to pay their student contribution upfront, or if eligible, can defer their fees through HECS-HELP.

In addition to tuition fees, students are required to pay a Services and Amenities Fee (SSAF). The purchase of textbooks and other course materials may also result in additional cost.

You can calculate your student contribution as a percentage of the amounts shown on the table. Fee rates are divided into four bands covering broad discipline areas. It is important to note that a particular subject within a course may fall within a different band.

For example, if you are enrolled in a 6-credit point Architecture subject, your contribution would be 6/48 x $9,314 = $1,164.

Student contribution amounts for 2025 commencing students

2025 student contribution - Area of Study	Amount for 48 cp
Law, Accounting, Administration, Economics, Commerce, Communications and Society and Culture	$16,992
Medicine, Dentistry and Veterinary Science	$13,241
Allied Health, Other Health, Built Environment, Computing, Visual & Performing Arts, Professional Pathway Psychology, Professional Pathway Social Work, Engineering, Surveying, Environmental Studies, Science and Pathology	$9,314
Education, Postgraduate Clinical Psychology, English, Mathematics, Statistics, Nursing or Foreign Languages and Agriculture	$4,627

International student

Tuition fees for international undergraduate students can be found using tuition fees search.

Tuition fees must be paid in advance each session and are subject to annual increase. Fees for future year(s) published in fees search, whilst unlikely to change, are estimates only. UTS makes every effort to provide up to date future year(s) fee estimates and to limit any changes, however, UTS reserves the right to vary fees for future year(s) at any time.

For this course, the cost per credit point for 2025 is $1092. The total credit points are 144.

All international students should familiarise themselves with the following documents:

Protocol on refund of fees for international students - contains the refund of fees information for international students.
Tuition Protection Service - designed to ensure that students receive the tuition they have paid for

In addition to tuition fees, students may be required to pay a Student Services and Amenities Fee (SSAF). Textbooks and other course materials will also result in additional costs.

UTS Alumni save 10%: alumni.uts.edu.au/advantage

For further information on costs related to your study at UTS, visit the international students' fees information page.

Careers

Career options include positions in engineering teams across the full spectrum of engineering activities. Specific career options depend on the major chosen.

Course structure

Course structure explained

Students are required to complete 144 credit points, comprising:

core program (including the Project BEngSc): 42 credit points
major: 84 credit points, and
electives: 18 credit points.

The major is selected at the time of admission; however, it is possible to apply to change major at a later date. Students admitted to the flexible major should decide by the end of the first year of full-time study whether to transfer to a designated major or continue with the flexible program.

Course completion requirements

Requirement	Credit Points
STM90356 Core subjects	36
CBK90228 Electives	18
48001 Project BEngSc	6
CBK90178 Major choice (Engineering Science)	84
Total	144

Additional information

Course duration

The course can be completed in three years of full-time study.

Full time, on campus

Admission requirements

Admission requirements

Applicants must have completed an Australian Year 12 qualification, Australian Qualifications Framework Diploma, or equivalent Australian or overseas qualification at the required level.

The English proficiency requirement for international students or local applicants with international qualifications is: IELTS Academic: 6.5 overall with a writing score of 6.0; or TOEFL iBT: 79-93 overall with a writing score of 21; or AE5: Pass; or PTE: 58-64 with a writing score of 50; or C1A/C2P: 176-184 with a writing score of 169.

Eligibility for admission does not guarantee offer of a place.

International students

Visa requirement: To obtain a student visa to study in Australia, international students must enrol full time and on campus. Australian student visa regulations also require international students studying on student visas to complete the course within the standard full-time duration. Students can extend their courses only in exceptional circumstances.

Check to see if there are additional admission requirements for this course.

Additional information relating to this course, including the ATAR profile of domestic students who commenced this course in Autumn 2022, is located under UTS' admissions requirements, alongside information relating to the commencing student cohort who were enrolled in this course past the Autumn 2022 census date.
If you don't meet the admission requirements for this course, there may be alternative pathways to help you gain admission.

Inherent requirements

Inherent requirements are academic and non-academic requirements that are essential to the successful completion of a course. For more information about inherent requirements and where prospective and current students can get assistance and advice regarding these, see the UTS Inherent requirements page.

Prospective and current students should carefully read the Inherent Requirements Statement below and consider whether they might experience challenges in successfully completing this course.

UTS will make reasonable adjustments to teaching and learning, assessment, professional experiences, course related work experience and other course activities to facilitate maximum participation by students with disabilities, carer responsibilities, and religious or cultural obligations in their courses.

For course specific information see the Faculty of Engineering & Information Technology Inherent (Essential) Requirements Statement.

Assumed knowledge

HSC Mathematics Extension 1; Physics; and English Standard. English Advanced is recommended.

For the Chemical Process and Civil Engineering major, Chemistry is recommended. For the Software Engineering major, a sound knowledge of the fundamentals of programming is recommended.

Year 12 adjustment factor scheme

To see a list of courses where HSC subjects provide adjustment factors, please refer to the Year 12 adjustment factors page.

Recognition of prior learning

Students who have completed equivalent subjects at a recognised tertiary education institution may be eligible for recognition of prior learning (RPL) if the subjects completed are deemed by the Faculty to be equivalent to subjects in the course. Established agreements for RPL with external tertiary institutions are outlined in the Recognition of prior learning tool.

To be considered for recognition of prior learning, subjects must normally have been completed no more than ten years prior to the commencement of this course. Limits apply to the number of credit points of RPL that can be granted.

Scholarships and prizes

Scholarships

For Engineering students

Only for international students

For all domestic students

Only for Aboriginal Australian or Torres Strait Islander students

Prizes and awards

For Engineering students

Transfer between UTS courses

Students enrolled in the Bachelor of Engineering Science may transfer to the Bachelor of Engineering (Honours) (C09066), subject to meeting minimum academic requirements. The subject 48001 Project BEngSc cannot be credited to any Bachelor of Engineering (Honours) course.

UTS: Handbook

See the Bachelor of Engineering Science in the UTS: Handbook for comprehensive course details.

Information for international students

Find out about support services, the Australian education system, accommodation and more to help you get the most out of your study at UTS.

Part of Faculty of Engineering and Information Technology

Engineering majors

There is a variety of engineering majors available with this course. The choice is yours.
Student support

UTS understands that university life can sometimes prove challenging. For that reason, UTS provides support to new and current students in many forms.
Prizes

There are a number of prizes available to those who display academic excellence.
Facilities and location

Faculty of Engineering and Information Technology students and researchers have access to state-of-the-art facilities.
Our strengths and reputation

Find out the reasons why a UTS Engineering degree will help you stand out from the crowd.

Domestic students

Before you apply

Here are a few important things for you to check out before you apply:

admission requirements for this course.
These can be found on the overview tab and there may also be additional entry requirements
required levels of English proficiency for the course you're interested in.
recognition of prior learning guidelines if you've undertaken previous study that might be credited towards your course at UTS.

How to apply

This is an exit-only course. Current UTS students wishing to transfer may submit an Internal Course Transfer - Graduating application. To confirm eligibility, check with the UTS Student Centre.

Intake

Autumn Session 2025
Spring Session 2025

Important dates

NOVEMBER 2024
1	Closing date for change of preferences (November Round 1)
8	UAC offers released (November Round 1)
14	Closing date for change of preferences (November Round 2)
21	UAC offers released (November Round 2)
28	Closing date for change of preferences (December Round 1)

DECEMBER 2024
5	UAC offers released (December Round 1)
18	UTS Info Day
18	Closing date for change of preferences (December Round 2)
23	UAC offers released (December Round 2)

JANUARY 2025
2	Closing date for change of preferences (January Round 1)
9	UAC offers released (January Round 1)
16	Closing date for change of preferences (January Round 2)
23	UAC offers released (January Round 2)
30	Closing date for change of preferences (February Round 1)

FEBRUARY 2025
3 - 14	Autumn session orientation
6	UAC offers released (February Round 1)
7	Closing date for change of preferences (February Round 2)
13	UAC offers released (February Round 2)
17	Autumn session commences (main calendar)
27	Closing date for change of preferences (March Round 1)

MARCH 2025
3	Last day to enrol for Autumn session
6	UAC offers released (March Round 1)
20	Autumn census date – last day to withdraw from subjects or apply for leave of absence

Need more information?

Ask UTS

Scholarships, prizes and awards

Scholarships

For Engineering students

Only for international students

For all domestic students

Only for Aboriginal Australian or Torres Strait Islander students

Prizes and awards

For Engineering students

International students

Before you apply

Here are a few important things for you to check out before you apply:

admission requirements for this course.
These can be found on the overview tab and there may also be additional entry requirements.
required levels of English proficiency for the course you’re interested in.
recognition of prior learning guidelines if you’ve undertaken previous study that might be credited towards your course at UTS.

You can meet an international student advisor at one of our events worldwide to ask questions and submit an application.

Important dates

Visit the UTS Handbook for full academic dates. Visit essential information for international students for the application closing dates.